Heat-resistant solid installation conductor

SiA
Copper conductor Silicone rubber insulation



Application:

For fixed installation in closed and dry places, under plaster or in pipe, on hooks, for linking of distribution tables, in places where temperature is much higher than environment temperature or under 0oC (thermal appliances or cooling appliances). Can also be used for wiring purposes.

Technical characteristics:

  • Produced according to DIN VDE 0282-3.
  • Rated voltage: 300/500 V
  • Test voltage: 2000 V
  • Breakdown voltage: 5000 V
  • Temperature range: from -60 0C to +180 0C
  • Temperature during installation: from 0 0C to +50 0C
  • Flame-retardant
  • Low smoke emission
Cable design:
  • Solid bare or tinned copper conductor
  • Flexibility class 1 according to IEC 228
  • Insulation: Silicone rubber
  • Insulation colour: White or upon request

Data:

Nominal section, mm2 Stranding diameter, mm Linear resistance at 20oC (Ohm/km) Nominal cable diameter, mm Nominal copper weight, kg/km Nominal cable weight, kg/km
Tinned copper Bare red copper Min. Max.
0.5 0.80 36.70 36.00 2.00 2.10 4.8 8.75
0.75 0.98 24.80 24.50 2.20 2.30 7.2 11.75
1 1.13 18.20 18.10 2.30 2.40 9.6 14.35
1.5 1.38 12.20 12.10 2.60 2.70 14.4 20.10
2.5 1.78 7.56 7.40 3.20 3.30 24.0 32.25


Please contact us for more information.





Your use of this site is governed by these Terms and Conditions and our Privacy Policy.
Please review them before you use the site.
Copyright 2003 - 2016. Omex Trade Bulgaria Ltd. All Rights Reserved.
For more information feel free to Contact Us!